|
SHOT TUMBLAST
MODEL"STB-IC"
This machine is the tumbler type shot blast,
It is used for the cleaning and removing sand, scale, burrs from small
casting of common casting iron, casting steel, non-metaric casting,
forging products, etc; shot peening and even for deburring plastic
products including synthetic rubber. This machine is constructed so
simple, easy operated and small installation space, therefore we can
get various feature as high cleaning ability, superiority of cleaned
surface, reduction of cleaning cast by half.
Model
|
STB-800
|
STB-1000
|
Impeller
(mm)
|
360φX
62
|
360φX
62
|
Electric
Motor (kw)
|
3.7X4
P
|
5.5X4
P
|
Treating
Capacity Per Month (Ton)
|
120~150
|
240~300
|
|
PLAIN
TABLE TYPE SHOT TABLAST "STA-1200"
|
As the junior model of Swing Table type shot
Tablast, Model "STA-1800" and "STA-2300", this
machine is designed to clean the work of small and medium size. Effectively.
Wide range of application is being available for flat. Fragile and
comparatively heavy items which are not suitable to be cleaned by
the tumbler type machine.
After loading the work table turns slowly and the work is blasted
effectively by the shot projected form 1 or 2 units of impeller.
Model
|
STA-1200
|
Impeller
(mm)
|
360φx62m/mx2set
|
Impeller
Motor (kw)
|
3.7
kw x 4Px2
|
Monthly
treating capacity (Ton)
|
250~450
Ton
|
Max.
weight & size of work (kg)
|
1100φx500
m/m 700kg
|
|
|
|
Aporn
Type Shot Blasting Machine
|
The SNB series shot blasting machine is equipped with to save the
resource and energy new impeller "X-30", which can reduction
of projection and maintenance time, increase of blade life etc, so
SNB is very economic and best effect. |
Model
|
SNB-1000
|
SNB-1300
|
Treating capacity
|
Capacity (m3/batch) |
0.28
|
0.5
|
Max.
weight (kg/batch) |
560
|
1,000
|
Max.
weight per piece(kg) |
30
|
40
|
Projection room (mm)
|
Φ900 x 1,000L
|
Φ1,140 x 1,300L
|
Impeller X-30
|
Drive
motor KW x unit |
11x1
|
15x1
|
Projection
amount (kg/min) |
170
|
240
|
Bucket loader
|
To select floor type or pit type
|
Dust collector
(m3/min)
|
For casting |
ES-M1C2(20)
|
ES-M1C3(30)
|
For
forged products |
ES-S0B1(10)
|
ES-S0B2(20)
|
Total Kito watt (including dust collector)
|
15.05
|
22.7
|
|
KSB Double-Track Suspended Sandblasting Machine
The Double-Track Jet Washer is an upgraded version of its single-track predecessor. It is suitable for the surface finishing work on large workpieces.
One major feature of this machine are the two hoists on each side. The workpiece can be hung on the right hoist while the workpiece on the left hoist are inside the machine for sandblasting. When the process is complete, the right hoist will switch places with the left hoist and proceeds into the machine for sandblasting while the left hoist is being used for the hanging processes of the workpiece.
|
|
Model
|
KSB-1215
|
KSB-1520
|
KSB-2025
|
KSB-2530
|
Handling capacity
|
Max. size of work(mm)
|
Ø1200xH1500
|
Ø1500xH2000
|
Ø1200xH1500
|
Ø2500xH3000
|
Weight(Ton)
|
1
|
2
|
2.5
|
5
|
Impeller
|
Impeller Type |
K-11
|
K-11
|
K-11
|
K-11
|
Impeller Quantity |
2
|
3
|
4
|
5
|
Dust collector
|
TDC-505
|
TDC-505
|
TDC-710
|
TDC-710
|
CND Super Tumble Sandblasting Machine
|
|
|
The Super Tumble Sandblasting Machine is for the surface sandblasting of small and medium casting and forging products. The major feature of this machine is that you’ll only need to place the casting or forging workpiece in the feeding funnel and start the machine. The sandblasting process is automated, just put in the workpiece and enter the processing time, press the auto-start button, and this machine will initiate the sandblasting process according to the processing time you entered. The sandblasting impeller in this machine is our own proprietary type K-11 impeller (patent no. I 271268), and its advantages are long service life and high sandblasting efficiency.
|
Model
|
CND-600
|
CND-1200
|
Handling capacity
|
Volume(m³/batch)
|
0.3
|
0.6
|
Max. weight(KG/batch)
|
600
|
1200
|
Max. weight per work piece (KG/pcs) |
20
|
30
|
Max. length per work piece(KG/pcs) |
400
|
550
|
Impeller
|
motor (KW)xPcs
|
22
|
30
|
Dimension of machine |
L(mm)
|
4600
|
6090
|
W(mm)
|
4350
|
4660
|
H(mm) |
6700
|
7500
|
The bead-shot machine for aluminum alloyed steels
|
|
|